Custom kitchens, wardrobes and joinery for Launceston - designed, built and installed with over 12 years of local experience
A walk-in wardrobe turns a spare corner or dedicated room into an organised dressing space with everything on show and in reach. We design and build custom walk-in robes for homes across Launceston and the Tamar Valley, from generous new builds at Legana, St Leonards and Summerhill to renovated character homes around Newstead and Trevallyn. Every walk-in starts with a free measure-and-quote, then design, workshop build and installation by our own team. You choose the layout of hanging, shelving, drawers and any island or bench, along with the finish, and we fit quality soft-close hardware throughout. Because there is no IKEA in Tasmania, a locally built walk-in means joinery designed for your exact room rather than flat-pack freighted from the mainland. Owner Steve Smith brings more than 12 years to every walk-in we build.
GET A FREE QUOTE
Launceston Custom Cabinets
Walk-in robes come in several shapes, and the right one depends on the room. A single-wall run suits a narrow space, an L-shaped or U-shaped layout makes the most of a dedicated dressing room, and a larger room can carry a central island or bench for folding and drawers. In newer Tamar Valley homes at Legana and St Leonards there is often room for a full walk-in behind the main bedroom, while renovated character homes can sometimes convert a small adjoining room into one. We plan the balance of long and short hanging, open shelving, drawers, shoe racks and accessory storage around your wardrobe. Finishes span melamine and laminate through to timber veneer and 2-pac, and open shelving can be paired with a few glass-fronted or drawer sections. Every layout is drawn to your room and how you like to dress.
Launceston Custom Cabinets
Internals and carcasses are usually built from hard-wearing melamine for an easy-clean, durable surface, with door and drawer fronts in laminate, timber veneer or 2-pac (polyurethane) depending on the look you want. Those finishes cope well with the humidity and temperature swings of a heated Launceston home through winter, though we are honest that timber and veneer can move slightly with the seasons. Soft-close hinges and runners are standard so drawers and any doors close quietly, with brands such as Blum and Hettich as examples of the calibre of hardware we fit, and manufacturer warranties apply. Adjustable shelving and rails let the walk-in adapt over time. Our own team installs the joinery and scribes it to the room, which matters where walls are not perfectly straight.
Launceston Custom Cabinets
With more than 12 years building cabinetry across Launceston and the Tamar Valley, Steve Smith designs walk-ins that make genuine use of the room rather than filling it with generic shelving. You get a fixed, itemised quote after the free measure, so the price is clear from the outset. The business is fully insured with $20 million public liability cover, and we stand behind our workmanship, with manufacturer warranties covering the hardware and materials we fit. Designing, building and installing in-house means one accountable team from first measure to final fit. For a space you use every morning, that local service and attention to detail counts.
Launceston Custom Cabinets
As a rough guide, a custom walk-in wardrobe in the Launceston area commonly falls between $5,000 and $15,000, though a compact single-wall fit-out can come in lower and a large dressing room with an island and premium finishes can sit well above it. The price depends on the size of the room, how much joinery it contains, the finishes, any island or bench, and the hardware. A walk-in built into a new Tamar Valley home can differ from one worked into a renovated character room where walls are uneven. We confirm your figure with a fixed, itemised quote after the free measure-and-quote.
Launceston Custom Cabinets
Flat-pack wardrobe systems come in fixed modules, and with no IKEA in Tasmania you are freighting them from the mainland or ordering online, then working around whatever they cannot fit. A walk-in is defined by its layout, so fixed modules that leave dead corners and gaps undermine the whole point of the room. A custom walk-in is designed for your exact space, using every wall and corner, with the mix of hanging, shelving and drawers planned around your wardrobe. You also choose the finishes and any island rather than accepting a set range. And a locally built walk-in is installed by our team and backed locally, instead of a carton freighted across Bass Strait.
Made-to-measure kitchens built for Launceston homes, from heritage renovations to new Tamar Valley builds. Free measure-and-quote, quality soft-close hardware and installation by our own team, with compliant benchtop options and no engineered stone.
Made-to-measure built-in wardrobes for Launceston bedrooms, from heritage character rooms to established family homes. Choose your doors, internal layout and finish, with soft-close hardware and a proper floor-to-ceiling fit by our own team.
Made-to-measure bathroom vanities built for Launceston and Tamar Valley homes, using moisture-resistant board and quality soft-close hardware, designed around your actual room and installed by our own local team.

It starts with a free in-home consultation where we measure your space, talk through how you want to use it and note any quirks of an older or non-standard room. From there we put together a design and a fixed, itemised quote, so you can see exactly what is included and what it will cost. There is no pressure and no obligation to go ahead.

Once you approve the design, your cabinetry is built to measure in our Launceston workshop. We cut, assemble and finish each piece for your specific room using materials and hardware chosen to suit the job, from cost-effective melamine carcasses to timber veneer and 2-pac doors. Lead times vary with the size and complexity of the project, and we will give you a realistic timeframe before we begin.

When your cabinetry is ready, our own team delivers and installs it, so the people who built it are the ones fitting it in your home. We level, scribe and adjust everything on site for a clean, precise result, then tidy up before we leave. If anything needs a final tweak, we sort it out on the spot.
They often do, and newer homes around Legana, St Leonards and Summerhill are a big part of our walk-in work. These homes are frequently designed with a dedicated robe space behind the main bedroom, which is ideal for a full walk-in with hanging, shelving, drawers and sometimes an island. We design the fit-out to your plans and how you like to dress, then build and install it with soft-close hardware. Because it is custom, every wall and corner of the room is put to use.
In many cases, yes, particularly where a small adjoining room or generous bedroom in a character home around Newstead or Trevallyn can be converted. Heritage rooms tend to have uneven walls and non-standard proportions, so made-to-measure joinery that scribes to the space is the right approach. We assess the room at the free measure and design a layout that works with its quirks rather than against them. Where a full walk-in is not practical, we can suggest a built-in robe instead.
A built-in robe sits flush against a bedroom wall behind doors, while a walk-in is a separate space or room you step into, usually with more open storage on show. Walk-ins suit larger bedrooms and newer homes with room to spare, whereas built-ins are ideal where floor space is tighter. Both are made to measure by us, with the internals planned around what you store. We can advise which suits your room and budget at the quote stage.
For a walk-in it usually is, because the room is defined by its layout and there is no IKEA in Tasmania to make flat-pack convenient. Freighted fixed modules tend to leave dead corners and gaps that waste the very space a walk-in is meant to use. A custom walk-in is designed for your exact room, putting every wall and corner to work, with finishes of your choosing. You also get local installation by our team and someone in the region to call, rather than a carton shipped across Bass Strait.
Internals and carcasses are typically hard-wearing melamine for an easy-clean, durable surface, with fronts in laminate, timber veneer or 2-pac (polyurethane) to suit the look you want. The veneer and 2-pac finishes handle the humidity and temperature swings of a heated Launceston home through winter, though we are honest that timber and veneer can move a little with the seasons. Open shelving can be combined with drawers and glass-fronted sections for display. We help you settle on finishes that suit the room and your budget during design.
As a guide, a custom walk-in wardrobe in the Launceston area often ranges from about $5,000 to $15,000, with compact single-wall fit-outs lower and large dressing rooms with an island and premium finishes higher. The figure depends on the size of the room, the amount of joinery, the finishes, any island or bench and the hardware. Every number is a guide until we measure the space. After the free measure-and-quote we provide a fixed, itemised price so you know exactly what is included.
GET A FREE QUOTE
BUSINESS
SERVICES
SERVICE AREAS
OPERATING HOURS
Sun: 7:00am - 9:00pm
Mon: 7:00am - 9:00pm
Tue: 7:00am - 9:00pm
Wed: 7:00am - 9:00pm
Thu: 7:00am - 9:00pm
Fri: 7:00am - 9:00pm
Sat: 7:00am - 9:00pm